Opsite Post Op Dressing

Opsite Post-Op is a revolutionary post-operative dressing combining a high Moisture Vapour Transmission Rate (MVTR) film and the cushioning and absorbency of a low adherent pad together with an easy application carrier system. The hydrophilic polyurethane film on Opsite Post-Op has Reactic properties that switch on in the presence of moisture allowing any excess to transpire into the atmosphere.

Features:

• Bacterial barrier - Protects the site against extrinsic contamination, reducing the risk of infection by bacteria.
• Waterproof film - Patient can shower with the dressing in situ.
• Low allergy adhesive - A unique grid pattern adhesive minimising the risk of an allergic response.
• Highly absorbent pad - Rapidly absorbs serous exudate. Allows lateral spread across the pad to maximise absorbency and reduce the risk of skin maceration.
• Low adherence - The wound contact layer enables exudate to pass through to allow minimal trauma on removal.
• Conformable - Comfortable and non obtrusive for the patient.
• High MVTR - The Reactic film has a unique molecular structure with an MVTR of 11000g/m 2 /24hr 3 , making it significantly more permeable to water vapour than ordinary films in the presence of moisture.
• Round corners/thin film - Reduces occurrence of lifting or snag, helping the dressing to stay in place for longer.

Instructions for Use

1. Wash hands before and after treating the wound.
2. Gently clean and dry the wound and surrounding skin. NB. Stop any bleeding (apply pressure if necessary) and ensure that the skin is completely dry around the wound.
3. Remove dressing from pouch.
4. Remove the top release paper marked “1”.
5. Place the dressing using light pressure.
6. Remove the second release paper marked “1” and smooth the dressing down.
7. Remove the top covering marked "2".
8. To remove the dressing, lift one corner and slowly stretch the film in a motion that is parallel to the skin.

Precautions for Use